|
|
|
|
|
#1
03-26-2001, 04:08 PM
|
|||
|
|||
|
The interior door latches on my 91 560SEC do not lay flush with the door panel (both driver and passenger door) It feels like the spring that pulls it in flush is weak, and they protrude about 3/8". Is there an adjustment to tighten or make them flush, or do I need to remove the door panel and replace the spring ? My dealer says since there is no "spring" listed as a separate part, I will need to replace the entire mechanism. Any thoughts on repairing this minor annoyance ? Thanks very much !
|
|
#2
03-27-2001, 06:02 AM
|
||||
|
||||
|
I have the same problem on my passenger door. And slightly on my drivers door. I was just thinking about this too. Now that this post is back at the top, maybe someone will be kind enough to let us know how to fix this!
__________________
2006 E350 w/ 155k miles (Daily Driver) Previous: 1993 300E 3.2L Sedan w/ close to about 300k miles 2003 E500 Brilliant Silver (Had 217k miles when totalled!) 1989 300E with 289,000 miles (had for <1 yr while in HI) 03 CLK 500 cabrio (Mom's) 2006 C230k (Dad's) 1999 S420 (Mom's/Dad's) 2000 C230k Sport sedans 2001 CLK320 Cabrio (Mom's) 1995 C280 My First Mercedes-Benz... (155k miles. EXCEPTIONAL AUTOMOBILE. Was Very hard to let go of!)
|
 |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Cooling System Flush 300TE 4M? | Hazen | Tech Help | 19 | 06-14-2004 02:25 PM |
| Switching back to R12. Compressor Flush out? | Eric Eliel | Diesel Discussion | 12 | 05-02-2004 03:17 PM |
| to flush or not to flush, that is the question | stevelewis | Diesel Discussion | 26 | 12-30-2003 06:05 PM |
| Citric acid flush -- a caution | seacoast_benz | Tech Help | 2 | 05-20-2003 01:38 AM |
| New coolant flush method? | 95E320cab | Tech Help | 6 | 05-02-2003 12:57 PM |
Linear Mode
