|
|
|
#1
|
||||
|
||||
c230 head torque sequence
I will be replacing the head gasket on a 1997 c230. Can someone provide* me with the proper torque sequence? Ordered service manual (eBay) has not arrived and I'd like to begin the tear-down, immediately.
Can anyone help with the*111.974 engine head torque sequence info? Best Regards |
#2
|
|||
|
|||
Cylinder head bolts:
3-stage tightening sequence for 111.974 engine. 1. Torque to 55Nm/44lbf ft. 2. Angle tighten through a further 90degrees in sequence. 3. Angle tighten through a further 90degrees in sequence. Insert timing cover to cyl.head bolts(4) and torque to 25Nm/18lbf ft. Geo. |
#3
|
||||
|
||||
torque tightening sequence
Thanks, but, I need the sequential numbers, as to the, order in which to tighten the bolts.
Best Regards |
#4
|
|||
|
|||
8 4 2 6 10
Front< 7 3 1 5 9 Tighten in above numerical order in stages previously outlined. Hope this is what you need , Geo. |
Bookmarks |
|
|