Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 04-26-2001, 01:32 PM
Registered User
 
Join Date: Apr 2001
Location: Doylestown, PA
Posts: 124
Ok. I have the heater core replaced, just have to finish putting some things back together. Now on to the head removal. Any suggestions? Do I have to leave the intake manifold on and remove the carb? '88 190E 2.3L.

__________________
1988 190E 2.3 (178,000)
FastLane, PartsShop and this forum rule!!!
Reply With Quote
  #2  
Old 04-27-2001, 09:42 AM
Registered User
 
Join Date: Apr 2001
Location: Doylestown, PA
Posts: 124
anyone?
__________________
1988 190E 2.3 (178,000)
FastLane, PartsShop and this forum rule!!!
Reply With Quote
  #3  
Old 04-27-2001, 09:35 PM
Registered User
 
Join Date: Mar 1999
Location: Suwanee, GA, USA
Posts: 4,712
Kodiak,

The reason no one has responded is that there is no carb on your car.

I would leave the intake in place and remove the exhaust manifold and head together.
__________________
Benzmac:
Donnie Drummonds
ASE CERTIFIED MASTER AUTO TECHNICIAN
MERCEDES SPECIALIST 11 YRS
Reply With Quote
  #4  
Old 04-28-2001, 03:23 AM
Senior Member
 
Join Date: Apr 2001
Location: Beech Island, S.C.
Posts: 468
The way I do it is remove the nuts attaching the exhaust manifold to the head and the bolts attaching the intake to the head. You will have enough room to remove the head without any damage.
Reply With Quote
  #5  
Old 04-28-2001, 08:50 PM
Registered User
 
Join Date: Apr 2001
Location: Doylestown, PA
Posts: 124
Thanks guys for the help. I took it off today the way Stan suggested. Its off and the valves look like hell. Benzmac, It sure looks like a carb, is it fuel injected? Pretty sad I don't even know. At any rate, now with the timing chain. I pulled the pins that hold the chain guide in place but what about the chain? I marked the link correspondence to the cam gear. How do I get the distributor where it is supposed to be in relation to the rest of the stuff? Thanks for your previous posts. This forum is the most valuble tool that a do it yourselfer can have in his toolbox. Thanks again

Kyle
__________________
1988 190E 2.3 (178,000)
FastLane, PartsShop and this forum rule!!!
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cylinder head trouble xp190 Tech Help 10 06-23-2004 03:19 PM
3.0 Cyl Head Removal Question - Guide rail Locating Pin removal CE4me Tech Help 4 10-29-2003 06:44 PM
1983 300D head job engatwork Diesel Discussion 23 04-24-2002 10:16 PM
OM603 head removal question gsxr Diesel Discussion 1 02-14-2002 08:31 PM



All times are GMT -4. The time now is 02:14 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page