Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 05-01-2001, 03:39 PM
85lucky
Guest
 
Posts: n/a
Hi all,
I have a 1985 190e 2.3 automatic, there is blowby present at the oil filler cap, but the engine does not use much oil, approx .5 liter in 3000km. I suspect a plug pcv system but can't find any diagrams wrt to how the system is setup. Could some one tell me if the system is prone to plugging, and if so where the offending part is located. I've removed the aircleaner. The hose out of the valve cover and the restrictor valve seem okay.
Thanks in advance.
Neil.

ps websites with discription or diagrams are good to.
Reply With Quote
  #2  
Old 05-01-2001, 05:45 PM
WDurrance
Guest
 
Posts: n/a
The breather system on a 190E isn't really prone to problems. I think what you're seeing (if you pull the filler cap) is normal. On any 4 cylinder engine, two pistons are up and two are down. They do tend to "pump" a little pressure through the crankcase. Also, the cam is spinning and spraying oil all over.
Regards,
Randy D.
Reply With Quote
  #3  
Old 05-01-2001, 06:16 PM
85lucky
Guest
 
Posts: n/a
Thank you for your comments. Just to clarify this in my mind with the filler cap off there is a fair bit of windage from the pistons normally? I thought it was a block vent system because the valve cover has oil around the oil filler cap, and the air cleaner lid above the inlet for the pcv system looks like it's having air forced against it.
Shouldn't it be drawing air from there, and oil appears to be leaking from the rear of the engine, I was thinking that the rear main might be having oil forced out of it. Does that make any sense?
Thanks again,
Neil.
Reply With Quote
  #4  
Old 05-01-2001, 11:11 PM
85lucky
Guest
 
Posts: n/a
Thanks,
That sound reassuring. What was it that you clean out in the psv system? It's one of those things I need to check now.
Thanks,
Neil.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
For Sale:Excellent clear quality sounding stereo system ready to install. supermech2001 Car Audio and Multimedia 0 11-07-2004 01:01 PM
Summer behind the door, another A/C thread Jassper Diesel Discussion 3 04-13-2003 03:47 PM
1992 500SL ASR System Problem jrodnar SL Forum 3 04-05-2003 03:34 PM
Does the ML have a PCV hose and valve system lamk ML, GL, G-Wagen, R-Class, Unimog, Sprinter 1 03-24-2003 10:57 AM
82 300D cooling problems DIESEL Diesel Discussion 6 05-03-2002 01:47 AM



All times are GMT -4. The time now is 06:05 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page