As I recall there are some large O rings at the bottom of the clutch drums that need to be replaced. Unfortunately, it requires removing some rivets, replacing the O ring then tapping the rivet hole and installing some flat head screws to replace the rivets. This is the only way to replace these O rings. Did you do that? You should have done all the seals and O rings while you were in there

__________________
I got too many cars!! Insurance eats me alive. Dave

78 Corvette Stingray - 3k
82 242 Turbo Volvo - Manual - 270k
86 300e 5 speed manual - 210k
87 420sel - 240k
89 560sl - 78k
91 420sel - 205k
91 560sel - 85k
94 GMC Suburban - 90k
97 Harley Davidson Heritage Softail - 25k
00 GMC Silverado 1 ton 30k