Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 05-08-2001, 02:16 AM
Registered User
 
Join Date: Apr 2000
Location: LEMONT-CHICAGO
Posts: 412
My Window regulator sliding jaw broke up like the Six million Dollar Mans aircraft. The window would only roll halfway up. Upon removing the door panel the lower regulator mounting bolt pulled out of the door frame and the nylon sliding jaw was in pieces. I hammer and dollied the regulator mounting point flat and used a washeer to re-fasten the regulator to the door frame. I am puzzled on two things. How to replace the nylon sliding jaw on the regulator. And # 2 I have a couple of pieces that I cant figure out where they go. A tensioning spring and nylon half roung bushing that I found in the inner door panel. Any help would be appreciated.
__________________
1990 190E 2.6
1996 Grand Voyager 3.3
1985 Mustang GT 5.0 5 SPD
1982 Suzuki GS 750T
Reply With Quote
  #2  
Old 05-08-2001, 10:08 PM
Registered User
 
Join Date: Mar 1999
Location: Suwanee, GA, USA
Posts: 4,712
There is no fix for this one. You will have to replace the regulator assembly.

The 126 has a replaceable jaw, but it is the only one.
__________________
Benzmac:
Donnie Drummonds
ASE CERTIFIED MASTER AUTO TECHNICIAN
MERCEDES SPECIALIST 11 YRS
Reply With Quote
  #3  
Old 05-09-2001, 02:00 AM
Registered User
 
Join Date: Apr 2000
Location: LEMONT-CHICAGO
Posts: 412
i was wondering why was I able to purchase the sliding jaw if it can't be replaced. The nylon jaw was broken and appeared to have been replaced before( because there was another broken sliding jaw found inside the door frame). It appears as this may be a commen problem as the Mercedes Benz parts man at the dealer had many in stock and gave me the impression that it was a common problem. I need to knoe if there is an easy way to put the nylon sliding jaw in, but it looks like I will have to remove the regulator to fix it. The window will roll upand down after I repaired where the regulator pulled through the door frame.
Thanks for the help on this one. The cd rom manual from Mercedes does not cover this, the Popular Mechanics cd rom from Alldata does not cover this nor does the Haynes 190 manual.
__________________
1990 190E 2.6
1996 Grand Voyager 3.3
1985 Mustang GT 5.0 5 SPD
1982 Suzuki GS 750T
Reply With Quote
  #4  
Old 05-18-2001, 01:46 AM
Senior Member
 
Join Date: Apr 2001
Location: Beech Island, S.C.
Posts: 468
window not working

It can't be fixed. Replace the window regulator. It comes complete with a new motor
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
PEEN or DRILL window sliding jaw mattsuzie Tech Help 13 12-19-2008 05:29 PM
W126 window problem (not sliding jaw) James L Tech Help 9 11-23-2005 09:29 PM
sliding window jaw jivadent Diesel Discussion 12 07-25-2002 07:08 PM
W126 91 300SE window sliding jaw sixto Tech Help 2 06-03-2001 01:19 AM
Pwr Window - Sliding Jaw question 16vwannabe Tech Help 2 04-24-2001 12:07 AM



All times are GMT -4. The time now is 11:48 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page