Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 02-02-2007, 10:16 AM
Registered User
 
Join Date: Jan 2007
Posts: 38
W201 - Adjusting Park Setting for Mono-Wiper

Hi all,

On my 1987 190D the mono-wiper functions properly when running. In other words, speed is good and it covers the full range of the windshield.

The problem comes when I turn the wiper off. It parks itself a good six inches too high. Is this adjustable and if so can someone share with me the details?

Thanks.

Reply With Quote
  #2  
Old 02-02-2007, 08:16 PM
whunter's Avatar
Moderator
 
Join Date: Dec 2003
Location: Metro Detroit, Michigan
Posts: 17,357
Answer:

MONO BLADE VERTICAL parked windshield wiper
http://members.lycos.nl/mbenz/windshield_wiper.htm

Hesitating Wiper Repair
http://202tech.mkosonen.com/howto/wiper.html








Have a great day.
__________________
ASE Master Mechanic
asemastermechanic@juno.com

Prototype R&D/testing:
Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician.
Noise Vibration and Harshness (NVH).
Dynamometer.
Heat exchanger durability.
HV-A/C Climate Control.
Vehicle build.
Fleet Durability
Technical Quality Auditor.
Automotive Technical Writer

1980 240D
1983 300D
1984 190D
Reply With Quote
  #3  
Old 02-17-2007, 10:51 PM
Registered User
 
Join Date: Jan 2007
Posts: 38
On my W201 I have managed to remove the access panel and have unbolted the motor and wiper assembly from the body including the little piece that attaches to the firewall.

Should the motor and assembly be removed as one piece? If so, I just can not figure out how to manuever them out, especially the motor. Is there another piece I need to remove? I could disconnect the wiper asemply linkage from the motor but, based on the vertical wiper instructions, it is not at all clear if this is something I should or should not be doing?

Any help much appreciated.
Reply With Quote
  #4  
Old 02-18-2007, 12:01 AM
whunter's Avatar
Moderator
 
Join Date: Dec 2003
Location: Metro Detroit, Michigan
Posts: 17,357
Answer:

Remove the motor nut.
Remove the link arm from motor.
Remove three bolts holding motor to link assembly.
Remove link assembly.
Remove motor.

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 10:15 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page