|
|
|
#1
|
|||
|
|||
Do any of you blokes out there know how to do the kind of dent repair that they advertise as "paintless dent repair"? It's the art of re-shaping the sheet metal without damaging the paint in order to smooth out those little bumps and dings. If you know of a web site that gives us a primer (no pun intended) on the subject then that would be way cool too. Thanks in advance.
Thom
__________________
1987 300E 1967 Jaguar E-type Series I, 2+2 |
#2
|
|||
|
|||
just type paintless dent repair into search engine "google"
and you will get dozens of sites on the subject . Most of them are selling the equiptment and courses on how to do it and how you can make three million dollars a day doing it but you can gleam some info from these sites....... William Rogers..... |
#3
|
|||
|
|||
I was doing a search on the subject just like you a couple of months ago so I could fix 2 small dings.
I found a forum with a good general view of the process, click here to get there. Good luck. |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Sunroof Repair Cost on W126 (Reasonable?) | Lance Allison | Tech Help | 18 | 06-07-2019 10:53 PM |
Who's done rocker rust repair? | cscmc1 | Bodywork - Repair, Paint, Tools, Tips & Tricks | 32 | 10-30-2005 09:24 PM |
windshield chip | dweller | Detailing and Interior | 4 | 04-06-2004 07:43 AM |
Curb Scrap Repair | Clemson91 | Mercedes-Benz Wheels & Tires | 3 | 10-04-2002 04:15 PM |
Argh! #@*$&#@ Repair advice needed | Zeus | Tech Help | 14 | 02-21-2002 01:34 PM |