I could use a little help rewiring my ignition switch.


The wiring harness has the following wires coming from it:

Red Wire
Red Wire
Pink with red stripe
Pink with green stripe
Pink with yellow stripe
Two purple wires in one connector
Green with a white stripe

The Ignition switch has the following terminals

P30
15R
50
30
15X
30
15


Can someone connect the dots?

Thanks

Chris

Don't have a diagram at home but the RED wires go to circuit 30.
The purple go to circuit 50.
The pink/green should go to 15X.
The small wire should be green/white should be P30.
I *think* the pink/red is circuit 15,
& that would leave the pink/yellow for circuit 15R.

The difference between 15 & 15R is that 15R is the accessory circuit.

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator

can some one tell me how to remove the wiring harness in a 1991 MB 300D w124 2.5 turbo diesel car??? please if you can!!! i have all of the dash opened from under the steering wheel all i need is the harness not the switch or the tumbler i need to get to tap to the wires for a remote start module
thank you
denis