|
|
|
|
|
|
|
#1
10-09-2003, 08:39 PM
|
|||
|
|||
|
But wait, there's more...
Turns out that what I thought was a fix with the alarm system was not a fix at all.
Over the next several weeks, the car stalled immediatly after startup 4 times, only once did it fix with the door lock button trick. Then I subscribe to Alldata DIY to gain access to the factory service data - www.alldataDIY.com - I really reccomend this - and I find a TSB on this problem. The car throws a trouble code 17 - bad crank trigger. The TSB says to make a .5mm thick shim from gasket material to space the crank trigger up away from the flywheel to fix. That seems to have fixed it. Until next time, that is! 
|
 |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| W124 E320 no start - pulled neutral safety switch - what do you think? | 71Rcode | Tech Help | 21 | 11-24-2004 07:04 AM |
| Please help me start a non-starting 240D. | ericnguyen | Diesel Discussion | 4 | 05-15-2003 09:58 AM |
| Please help me start a non-starting 240D. | ericnguyen | Tech Help | 2 | 05-15-2003 07:02 AM |
| What may be wrong if a 1981 Mercedes 240D can only start when doing a push start? | ericnguyen | Diesel Discussion | 5 | 03-26-2003 10:40 AM |
| 1991 420SEL - beginning of a cold start problem | DieselGuy | Tech Help | 1 | 07-30-2001 03:56 AM |
Hybrid Mode
