Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 06-25-2007, 12:40 PM
Registered User
 
Join Date: Jun 2007
Posts: 3
C280 Car stalling

My 95 c280 starts ok, but when I put it in gear and press the gas it stalls. This happens when engine is cold. Also happens at a stop light occaisonally. I can get it to stall when I turn the a/c on and start to press the gas. When I am driving and not stopping and going my a/c runs fine.

Its like I am not getting enough gas??? I dont know??

I have replaced o2 sensors, ovp, I am at a loss. I have looked at the egr, but I have read enough that says if it stalls cold then egr is fine. Please correct me if I am wrong

Any suggestions?
Reply With Quote
  #2  
Old 10-11-2007, 07:57 PM
Registered User
 
Join Date: Jun 2007
Posts: 3
Anybody???

I am still having this problem.. Any Ideas.. I have searched and searched..

Thanks in Advance
Reply With Quote
  #3  
Old 10-11-2007, 08:18 PM
Registered User
 
Join Date: Jan 2007
Posts: 165
It's as easy as.............

I think I know where your problem is stemming from, since I had the same problem with my M104 engine!

It's as easy as M. A. F.!!!!!!!!!!!!!!!

(Mass Air-Flow sensor!)

Replace it! And you will be off and running!!!!!!!!!!!
__________________
My Work:
Mercedes-Benz Manhattan, Inc.
Business Development
536 West 41st Street
New York, NY 10036

-My Garage-
1996 E320: White 118,000 miles ~Dad's Driver~
1996 E320: Green 109,000 miles ~Mom's Driver~
~My Babies~
2000 SL500: Desert Sand 96,000 miles
-Previoulsy Judge Judy's-
2008 E350 4MATIC Sport
-Flint Grey/ Ash/ Black Birds Eye Maple-
Reply With Quote
  #4  
Old 10-11-2007, 08:49 PM
Registered User
 
Join Date: Jun 2007
Posts: 3
thanks

I have thought of that, but never had any info. Where is the MAF located and what is the difficulty of replacing it? I appreciate your help, I have lived with this for a while.

D
Reply With Quote
  #5  
Old 10-11-2007, 11:25 PM
Registered User
 
Join Date: Feb 2004
Location: Walnut Creek, CA & 1,150 miles S of Key West
Posts: 4,874
I would suggest pulling the codes and finding out what comes up first. If it stalls, something ought to be present as it is effecting emmissions out teh tailpipe.

Search "arthur dalton's" name and "LED code reader" to learn how to make one. Look and see how many pins your port has so you build the right reader.

Then search for "95 CEL's" or "codes" for the list of whats what.

The MAF looks like this. http://catalog.worldpac.com/mercedesshop/sophio/wizard.jsp?partner=mercedesshop&clientid=catalog.mercedesshop&baseurl=http://catalog.peachparts.com/&cookieid=25L0RF04Y2791C2YH7&year=1995&make=MB&model=C-280-001&category=B&part=Air+Mass+Meter

It is attached downstream of your air filter.

They can someitmes be sprayed clean with special MAF cleaner.

Code stuff: need to pull diagnostic codes from 94 c280
__________________
Terry Allison
N. Calif. & S. of Key West

09' E320 Bluetec 77k

Last edited by TMAllison; 10-11-2007 at 11:53 PM.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 03:53 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page