Her is the vital statistics.

1992 190e 2.3
here what I have checked..

cam position sensor

where the hell is the TDC sensor and what should it be reading?

Ignition control module

I have got spark and what appears to be timing

the Ignition coil is reading to specifications

The EHA is reading to specification

I have in excess of 100psi of fuel pressure pre- regulator

the command control module appears to be working given what little reading I could make with the limited equipment

spark plugs and wires and cap and rotor all read good

Engine pressure is above 150lbs per cylinder

the timing chain is still on and in place and tight

I have check all 21 sensor wires for shorts and have found some bad insulation but no shorts.


AND WHY WON'T THIS BAD BOY START........I NEED IDEAS BADLY PLEASE SEND ANY QUESTIONS OR ADVICE