|
|
|
#1
|
|||
|
|||
Ignition switch help!
I have a 1990 560 sel, I have replaced the tumbler assembly two days ago. Now I go to start the car later today and nothing. The key buzzs when door open, but no starter engagement. No regular dash lites with key rotated to start postition.
Bad ignition switch maybe? Does anyone have a picture or dissambly instructions there willing to share? I have a hanes manual but no ignition switch info in my manual. I see many posts but nothing for a 1990 560 sle on ignition. |
#2
|
|||
|
|||
Did you try starting it in neutral?
__________________
-Marty 1986 300E 220,000 miles+ transmission impossible (Now waiting under a bridge in order to become one) Reading your M103 duty cycle: http://www.peachparts.com/shopforum/831799-post13.html http://www.peachparts.com/shopforum/831807-post14.html |
#3
|
|||
|
|||
No I did not think of that!
Would low battery voltage cause this also? |
#4
|
||||
|
||||
If starting in neutral works, problem is probably neutral safety switch. Our '95 e320 has this problem, sometimes starts in park, always in neutral. Seems to start in park in hot weather more.
__________________
________________________ 2002 Mercedes-Benz E320 4Matic 1995 Mercedes-Benz E320 Wagon 2005 Land Rover LR3 V8 SE 1999 Audi A8 4.2L quattro |
#5
|
|||
|
|||
I fixed this problem the ignition switch was pushed out during the tumbler removal process.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|