![]() |
|
|
|
#1
|
|||
|
|||
722.6 Stuck in 2nd
722.6 in a 1997 E320, 190K miles. Ran great until the last 2 to 3 weeks where I had been getting intermittent harsh shifts. Today I noticed at 60 mph it was stuck in 3rd, and wouldn't upshift. At the next restart I got "check engine electronincs" along with check engine light, and now it is stuck in 2nd. I'm guessing this is limp mode.
About 1000 miles ago I serviced the trans which included new ATF ordered from Phil (the proper expensive stuff), and new filter and gasket also from Phil. I checked the level with IR thermometer and the dipstick tool (also from Phil). Checked the level several times over the course of a couple weeks on various surfaces to ensure it was at proper level. Also checked harness for fluid wicking up, but mine wasn't suffering from that. I did replace the valve body solenoid pressure control spring during the service, as the original had collapsed, leading to sloppy 2 to 3 shift. I've searched here, but it seems like I have already covered the bases. Is a trip to an Indy the next step?
__________________
08 W251 R350 97 W210 E320 91 W124 300E 86 W126 560SEL 85 W126 380SE Silver 85 W126 380SE Cranberry 79 W123 250 78 W123 280E 75 W114 280 |
Bookmarks |
|
|