|
|
|
#1
|
||||
|
||||
w124 firewall wire routing
hey everyone...
i have a 1995 E320 wagon. i installed a secondary horn in the engine bay below the front bumper. i want to run the wire for it back into the headunit (as a power source). i have managed to poke the wire through the rubber grommet in the firewall behind the brake booster. it looks like those wires run right behind the instrument cluster. the problem: i can't find the wires from the inside of the car. does anyone have any tips on accessing the area where those wires come through the firewall? i have already removed the carpet, the sound deadener, and the center console side panel. but i don't want to dismantle or damage anything uncesssary. thanks everyone! eric
__________________
1995 E320 Sportline Wagon "Bernard" black on black leather http://i.imgur.com/BdZ7jM3.png |
#2
|
|||
|
|||
There's probably more suggestions in the Audio section where I found this one...
per rsmcmahon Look for a possible point of passage through the firewall on the passenger side just behind main computer box. You will see many other wires running through the firewall at this point. I had a cell phone, hands free kit mounted with the wiring running through this area. Or if you want to... Instrument cluster removal Lets' Pull the Instrument Cluster! Bob |
#3
|
||||
|
||||
thanks bob! turns out the instrument cluster was the right answer!
but... a friend pulled upart the plastic piece beneath the steering column and saw the coat hanger i used to push the wire through so voila! thanks! eric
__________________
1995 E320 Sportline Wagon "Bernard" black on black leather http://i.imgur.com/BdZ7jM3.png |
Bookmarks |
|
|