Have you read MENU#24 . . . as you should have . . . . there's a schematic there . . .

__________________
Regards . . . . JimF
-------------------
'94 S500 Cpe

Visit my Mercedes Web Page

JIm
I do have your schematic but i would be a lot more confident if i had a diagram of the circuit board.

Sal

Here's a link to Pete's S600 page namely the ETA repair (fine work!). The S600 requires two (2) ETAs (twice the fun!) so maybe the pics will help.

http://v12uberalles.com/throttle_actuator_rewire.htm

__________________
Regards . . . . JimF
-------------------
'94 S500 Cpe

Visit my Mercedes Web Page

Jim
Great thread but my circuit board does not have letters on it.His circuit board is horizontal but my cb is vertical and different.
I need to know where pins 1,2,3,6,8,10,go on my circuit board.

My eta part # is 00141 5225
If you could look at the one you took apart, if you still have it, that would be great.
Sal

I still have it but it's been rebuilt by Beckmann and don't want to take it apart. Sorry.

Maybe somebody here has one apart . . .

__________________
Regards . . . . JimF
-------------------
'94 S500 Cpe

Visit my Mercedes Web Page

Jim

Do you know where the 4 resistors on the cb are shown on the diagram?
Sal

I just replaced my ETA with a bebuilt one. It cost me $735. It is out of the limp mode now but it has a miss in it. My asr and my abs lights are still on . What do I do now?
HELP
Sal
p.s.

I still have 13 and 33 blinks on diagnostic led.