![]() |
|
|
|
#1
|
|||
|
|||
W210 SOS disable help needed
2001 E320, I removed the factory phone, now getting SOS error message in the display. Is there a way to disable the error message? Thanks Rollin
|
#2
|
|||
|
|||
You need to have the system recoded to remove the option. This requires SDS. The dealer will have this. A very good indy might.
|
#3
|
||||
|
||||
Thats correct, they will need to change the coding in the cluster to tell it that car doesn't have Tele-Aid. You may have to sign something proving you requested this to be done for liabily, legality, etc.
__________________
![]() 1980 500SE/AMG Euro 1981 500SEL Euro 1982 380SEL 1983 300TD 1983 500SEC/AMG Euro 1984 500SEC 1984 300TD Euro 1986 190E 2.3-16 1986 190E 2.3 1987 300D 1997 C36 AMG 2003 C320T 4matic past: 1969 280SE 4.5 | 1978 240D | 1978 300D | 1981 300SD | 1981 300SD | 1982 300CD | 1983 300CD | 1983 300SD | 1983 380SEC | 1984 300D | 1984 300D | 1984 300TD | 1984 500SEL | 1984 300SD | 1985 300D | 1986 300E | 1986 560SEL | 1986 560SEL/Carat | 1987 560SEC | 1991 300D 2.5 | 2006 R350 |
#4
|
|||
|
|||
The factory phone and the teleaid phone are two separate units. The standard message that appears about teleaid is for the fact that the service subscription has run out. If that were the case the option can be deleted (with suitable liability waiver) in the cluster.
If one removes any piece of the optical network D2B, one will need to bridge it and reconfigure it. I am guessing that due to the removal of a D2B component the D2B network is broken and all that is required is to reconfigure it (and bridge the gap incurred with the component removal).
__________________
Steve Brotherton Continental Imports Gainesville FL Bosch Master, ASE Master, L1 33 years MB technician |
#5
|
|||
|
|||
I removed the tele-aid myself without reprogramming the cluster. I simply disconnected the box in the trunk. You'll need either skinny arms or a high pain threshold. The box is on the driver's side basically above the wheel well. At the same time I also removed the button, disconnected the wires and put the button back in. This was on our 2000 E320. The display doesn't show any errors any more
![]() -Tad
__________________
1995 G320 2003 C230 Kompressor Coupe 2005 ML500 2007 ML350 |
#6
|
|||
|
|||
I have not had any problems on my 01 but pushed the damm button by mistake once (to see if anyone would answer), and could not shut it up. I did pull the fuse and and got the error message, put it back. MB claims they can disable, I have not had it in for service
|
#7
|
|||
|
|||
Quote:
-Tad
__________________
1995 G320 2003 C230 Kompressor Coupe 2005 ML500 2007 ML350 |
![]() |
Bookmarks |
|
|