I found the problem.

It was my multi purpose relay that also controles the hazzard and viper etc... a lot of other stuff.

This relay had somehow jumped a bit out in its socket.
I put it back and put some soft tape material on the top of the relay so it wont jumo out again, this way the cover will push on the top of the relay.
I don´t know why it jumped out because it actualy sits prety tight when first pushed in the socket.
The relay is located behind the fuse boks and the relay has the letter "H" in the boks, you will need to remove the screws around the fuse boks to get in to the relay boks.

my soft tape trick was just to be sure it wont happend again.