|
|
|
|
|
#1
09-12-2001, 09:54 AM
|
|||
|
|||
|
'91 190E 2.3 part id?
There are several sensors or other appendages screwed into what appears to be part of the intake manifold water jacket, right behind the thermostat housing. One of them, which has a plastic top with a couple vacuum line nipples sticking up, has one of those nipples broken off inside the rubber hose elbow that connected it to a vacuum line. The other end of that vacuum line runs over to the driver's side inner fender, where there is an in-line check valve, and then on to I don't know where. The unbroken nipple attaches, I believe, to another device's nipple next to it.
I'm guessing the broken device is a temperature sensitive vacuum line valve. Is this so, and what does it control? How would I specify the new part to order? I have temporarily cleaned the old nipple and glued it back on. Thanks for any help! Steve 
|
|
#2
09-12-2001, 12:40 PM
|
|||
|
|||
|
Yes that is a thermo-vacuum valve that opens at 70degC. Part number is 001-141-62-60 & list is $14.50. It is for emission control system.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 1987 190E 2.3 Part name? | Del23 | Tech Help | 6 | 05-09-2003 07:31 PM |
| 190E front hub bolt patterns: 190E 2.3 vs. 190E 16v | haasman | Tech Help | 5 | 04-02-2003 04:29 PM |
| 190E 2.3 Trans | haasman | Tech Help | 6 | 02-10-2003 07:31 PM |
| 86' 190e 2.3 vs 88' 2.3 engine | pistolpete5113 | Tech Help | 5 | 12-03-2002 02:07 PM |
| 1986 190e 2.3 16v Cosworth transplant | paulwf | Tech Help | 4 | 05-29-2001 06:04 AM |
Linear Mode
