|
|
|
#1
|
|||
|
|||
Trans Kit - No Plugs
86 300e - auto trans. I plan to drain and fill trans soon (replacing filter), just received the kit and it did not include plugs. Is it ok to use old plugs when draining trans and converter. What are the torque settings for pan and plugs. Thanks
|
#2
|
|||
|
|||
You will reuse the plugs, but replace the seals on the plugs. Use the copper one on the pan and the aluminum one on the converter.
__________________
Benzmac: Donnie Drummonds ASE CERTIFIED MASTER AUTO TECHNICIAN MERCEDES SPECIALIST 11 YRS |
#3
|
||||
|
||||
Larry:
Torque on both of those is 14 nm. The pan bolts I usually torque to 10 nm, officially I believe it's 8nm, but the plugs are both 14. Gilly
__________________
Click here to see the items I have up for auction at EBay Click here to see a photo album of my '62 Sprite Project Moneypit (Now Sold) |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
glow plugs, loop vs. pencil | wheelguru | Diesel Discussion | 18 | 09-29-2006 09:03 AM |
I'm going to fix the trans leaks this winter but I need some advice! | Hatterasguy | Diesel Discussion | 34 | 01-12-2005 10:39 AM |
Trans designation # needed; trans issue | d.delano | Diesel Discussion | 5 | 09-15-2004 11:35 PM |
Lousy instructions on Bosch Fast Glow kit | JoshMB | Tech Help | 2 | 11-28-2002 03:22 AM |
Replace Spark Plugs in 560 | H. O. Tyler | Tech Help | 1 | 05-14-2000 08:33 AM |