|
|
|
|
|
#1
10-10-2001, 04:55 PM
|
|||
|
|||
|
torque specs
replacing the head on my 1991 190E 2.6 and need torque specs for the head, intake and exhaust manifolds, rocker arm assembly and the cam gear bolts. Any info would be much appreciated.
|
|
#2
10-10-2001, 05:45 PM
|
|||
|
|||
|
In with the head gasket kit should be a piece of paper with the head torque on it. I think it is 55nm +90 +90.
The rocker covers should be 18nm. The intake and exhaust, just tighten in an alternating pattern.
__________________
Benzmac: Donnie Drummonds ASE CERTIFIED MASTER AUTO TECHNICIAN MERCEDES SPECIALIST 11 YRS
|
|
#3
10-10-2001, 05:51 PM
|
|||
|
|||
|
The head bolt torque is 70Nm (50ftlbs) + 2 90deg rotation on every bolt. NO torgue spec on the exhaust as they are self locking nuts. The intake is 16-18Nm (12-14 ftlbs), and so are the cam bearings. The cam gear is 16Nm (12 ftlbs).
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator
|
 |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Help...torque specs???? | vwbuge | Tech Help | 2 | 04-01-2004 08:34 AM |
| Turbo / Exhaust torque specs | JHZR2 | Diesel Discussion | 0 | 12-05-2003 07:31 AM |
| Help water pump torque specs | BenzMatic | Tech Help | 1 | 08-03-2003 12:56 AM |
| Torque Spec's | mikesdl | Diesel Discussion | 5 | 11-21-2002 04:15 PM |
| Anyone with a manual who can give me some torque specs? | GregS | Diesel Discussion | 2 | 08-22-2002 10:16 PM |
Linear Mode
