|
|
|
#1
|
|||
|
|||
W126, 300SE wierd start problem
'88 300SE. Cold start, O.K...warm start problem. sometimes takes 3 start attempts. finally goes, but uneven for about 1 minute...then smooths out. occasional hesitation on acceleration. ANY SUGGESTIONS? (tried good, Redline, inj. cleaner..new plugs helped somewhat but old ones very bad so i'm not sure that wasn't coincidence) Thanks.
|
#2
|
|||
|
|||
I always start with the overvoltage relay, then start looking at injection nozzles.
__________________
Benzmac: Donnie Drummonds ASE CERTIFIED MASTER AUTO TECHNICIAN MERCEDES SPECIALIST 11 YRS |
#3
|
|||
|
|||
thanks, B-mac. will try tomorrow.
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
doesn't start, waterblaster the problem ? | MB300ENZ | Tech Help | 9 | 09-17-2003 10:26 PM |
C220 start problem | C220won'tstart | Tech Help | 6 | 09-23-2002 05:49 PM |
300e hot start problem | Tom Garrison | Tech Help | 4 | 08-14-2002 09:21 AM |
Diesel hot start problem | RunningTooHot | Diesel Discussion | 3 | 10-23-2001 07:49 PM |
1991 420SEL - beginning of a cold start problem | DieselGuy | Tech Help | 1 | 07-30-2001 03:56 AM |