Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 10-18-2001, 11:57 AM
gib
Guest
 
Posts: n/a
clutch bleed problem

After installing a new clutch in my 1980 240D I went to bleed the clutch hydraulics but the pedal was on the floor. I canít get any pressure to bleed the system. I noticed when I opened the line to remove the transmission the fluid just poured out. Also a few weeks ago my wife said when she went to leave in the morning she put the clutch in and the pedal went to the floor and she had to hook it with her toe and pull it back up. I did not think much of it then but now I think they may be related.
Any ideas?
Reply With Quote
  #2  
Old 10-18-2001, 09:44 PM
Registered User
 
Join Date: Mar 1999
Location: Suwanee, GA, USA
Posts: 4,712
You need to check the master cylinder under the dash for signs of leaks/seeps.

Also, a good trick is to use a pump bottle and bleed from the bottom up.
__________________
Benzmac:
Donnie Drummonds
ASE CERTIFIED MASTER AUTO TECHNICIAN
MERCEDES SPECIALIST 11 YRS
Reply With Quote
  #3  
Old 10-19-2001, 01:50 AM
Registered User
 
Join Date: Jan 2000
Location: PA
Posts: 5,440
Hook a line from one of the front brake calipers bleed screws to the slave cylinder bleed screw and pump the brakes to force fluid into the clutch system. If problem of clutch pedal going to floor persists, you have to rebuild the clutch master cylinder.

P E H
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Clutch master cylinder question W201 & 124. Greg in Oz Tech Help 24 01-19-2017 07:51 PM
I was hoping one of the MB techs had experienced this Greg in Oz Tech Help 15 12-13-2012 10:59 AM
Running list of failures during 3 years of ownership Q ML, GL, G-Wagen, R-Class, Unimog, Sprinter 33 01-22-2006 09:13 AM
problem with 1971 220 clutch rwilburn Vintage Mercedes 2 04-08-2002 09:42 PM
190e fan clutch benzoso Tech Help 1 03-30-2002 08:06 PM



All times are GMT -4. The time now is 11:54 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page