2001 E320
REPLACE YOUR CAMSHAFT POSITION SENSOR $ 76.41 this SITE 1/2 HR DIY

What part number on the plugs???? Found this failure once it was wrong plugs.

__________________
600SEL '91
300E 4Matic '88
240D '83
280SE '77
350SE '73
The most complex systems can fail in the simplest way.
Contra verbosus noli contendere verbis, sermo datur cunctis, animi sapientia paucis.

i don't believe in the lord! He's never bought me a Mercedes Benz.

It would seem to me that disconnecting that should have caused some kind of reaction, the fact that it didn't makes me think something's amiss with it.

"From what I've researched about a failed ETA is that they either work or they don't. (There isn't an "in between" where they'll cause slight problems)"
When the insulation on all those wires inside those things go bad, they sometimes cause problems, but sometimes they work fine, just like when the main harnesses go bad, stuff works sometimes, sometimes it doesn't. I would think this would be less of an issue on a non-ASR car though. Does your car have ASR?
Regards, Eric

__________________
89 300E "Benzer1" 15.924 Uncorrected
93 400E "Benzer3" 14.200 U.C.
95 E420 "Benzer4"
92 300E "Benzer5" 16.299 U.C. Future turbo CNG
87 300D "Benzer7"
87 300D "Benzer8"
87 300D "Benzer9"
87 300D/70 AMC Javelin "Sidewinder-Benzer"
87 300TD "Benzer11"
06 E320 CDI "Benzer12"
05 E320 CDI "Benzer12A"
71 AMC Javelin AMX 401 "Sidewinder"
74 AMC Hornet 401 "C.K.10" 13.63 U.C.
74 Bricklin SV1 "Presto" AMC 360 pwrd.

I have the exact same issue on my '94 e420, including the occasional stumble and, once in a while, very poor running which suddenly improves. Just wondering if you ever found the problem.

Thanks -- Greg