Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 10-12-2009, 03:10 AM
Registered User
 
Join Date: Jun 2005
Location: Malaysia
Posts: 54
Power Steering pump: pressure increase effect?

My power steering pump has a scored vane cylinder and generally has reached the end if it's service life. It is rated at 95bar.

I have sitting in front of me a gift: A new Mercedes ZF pump rated at 110bar.

Now the obvious question: if I fit the 110bar pump how will it effect the steering? I would not mind slightly lighter steering and the PS high pressure hose is new and should hold the pressure. I would like to give it a try before sourcing a rebuilt or junk yard 95bar replacement.

Comments and suggestions will be appreciated.

Regards,
bobf.

__________________
2.3-16:ROTREXsupercharger;water/air intercooler;Megasquirt EFI/EDIS/COP;2.5-16cams&exh manifold;3"exh;YellowSpeedRacing adjustable suspension kit all round;28mm ARB front,22mm rear;C32 brakesfront,AmgCl55alloyrear;500e servo/mstr cyl;RDMTEKstrut towers;Speedtek camberarms rear;nylonsubframe bushes;Poly-u bushes front&rear,SPEC lightened pressure plate;manual locking 3.07ASD diff;short shift gear change;215 front,235X40X17 rear,EVO8.25 rims
Reply With Quote
  #2  
Old 10-12-2009, 09:17 AM
Moderator
 
Join Date: Mar 1999
Location: Tucker, Ga USA
Posts: 12,153
The rating on that pump is for MAX pressure..durning normal steering operations the system will require less that 20-25 Bar.

No benefit to running higher pressure pump!
__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator
Reply With Quote
  #3  
Old 10-12-2009, 11:27 AM
Registered User
 
Join Date: Jun 2005
Location: Malaysia
Posts: 54
MB Doc,

Thanks for the prompt response. I assume there will be no effect and therefore no problem installing the 110bar pump in place of the 95bar pump. If I am wrong let me know quick.

Thanks again & best regards,
bobf.

__________________
2.3-16:ROTREXsupercharger;water/air intercooler;Megasquirt EFI/EDIS/COP;2.5-16cams&exh manifold;3"exh;YellowSpeedRacing adjustable suspension kit all round;28mm ARB front,22mm rear;C32 brakesfront,AmgCl55alloyrear;500e servo/mstr cyl;RDMTEKstrut towers;Speedtek camberarms rear;nylonsubframe bushes;Poly-u bushes front&rear,SPEC lightened pressure plate;manual locking 3.07ASD diff;short shift gear change;215 front,235X40X17 rear,EVO8.25 rims
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 06:08 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page