|
Power Steering pump: pressure increase effect?
My power steering pump has a scored vane cylinder and generally has reached the end if it's service life. It is rated at 95bar.
I have sitting in front of me a gift: A new Mercedes ZF pump rated at 110bar.
Now the obvious question: if I fit the 110bar pump how will it effect the steering? I would not mind slightly lighter steering and the PS high pressure hose is new and should hold the pressure. I would like to give it a try before sourcing a rebuilt or junk yard 95bar replacement.
Comments and suggestions will be appreciated.
Regards,
bobf.
__________________
2.3-16:ROTREXsupercharger;water/air intercooler;Megasquirt EFI/EDIS/COP;2.5-16cams&exh manifold;3"exh;YellowSpeedRacing adjustable suspension kit all round;28mm ARB front,22mm rear;C32 brakesfront,AmgCl55alloyrear;500e servo/mstr cyl;RDMTEKstrut towers;Speedtek camberarms rear;nylonsubframe bushes;Poly-u bushes front&rear,SPEC lightened pressure plate;manual locking 3.07ASD diff;short shift gear change;215 front,235X40X17 rear,EVO8.25 rims
|
10-12-2009, 02:10 AM
matsalleh76 
Threaded Mode
