Thanks for the response. Do you think that means O2 is bad though?

I have a friend who is a Mechanic and he got me an OVP Relay to try out. He said we could return it if the problem is still there. I put it in and everything seems to be running great right now. But the check engine light comes on now and it is solid. So I ran the tester again. Still getting Fault 17 on Pin 3, but now I am getting Faults 2,3,4,5,6, 12, and 13 on pin 14. I found an old post by someone having the same problems and same fault codes. He said he replaced the O2 sensor and MAS unit and was still getting all those codes. Of course he never told us what his solution was . He has not posted in 2 years but I tried him anyway. I will let you know if he responds.

The AC is also not working now. I will check fuses though. Could have burned out through all this mess. I thought I would add it incase it is some how connected. Well, let me know if those codes and problems makes sense to anyone else. I have the sheet to check them so I know what it says they mean. Thanks again everyone.