Quote:
Originally Posted by jfine7
You know what, turning the mixture screw should just move the top plate up or down, it doesn't do that, I should at least see that, with 3 + turns in either direction! If I push the top throttle plate with my finger a little, then idle changes, like it should.
I wonder if that screw is stripped??? I might have to take the whole little tower off....
|
Are you using the correct size allen wrench? Are you pressing down when you turn the adjustment screw?
If you get it to work, make sure you turn it just slightly to adjust the duty cycle.
03-04-2010, 07:10 PM
Threaded Mode
