|
|
|
#1
|
|||
|
|||
Caliper replacements
1984 500SEL, replacing all calipers, currently all are "ATE",
Does it matter which make I replace these with as long as they are replaced in pairs (both fron axle and both rear axle) ? Also which are better ATE or Bendix or Cardone, any help pls, or do most of you just rebuild the ones they have. These are not leaking but car has been sitting for four years and calipers are rusted. I am also replacing the front and rear suspension parts complete. God Bless Thanks John |
#2
|
|||
|
|||
Use either ATE OR Bendix in pairs.
Cardone doesn't make calipers, only an aftermarket re-builder,
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|