Nope, still the wrong codes. It's on pages 35-36, and also here - http://www.startekinfo.com/manual/volumes/e3/8_1/m11.jsp Clear the codes, drive it a while and see what comes back.

denyel
4 air injection inoperative would that have to deal with air sensor.
6 idle speed control
17 data exchange malfuntion between control modle
19 fuel injectors open/short self adaptation
20 speed signal would that have to deal with sensor on wheels

how do i fix theses problem 6,17,19 if i got 4, 20 right

Don't address your questions just to one person, you want lots of people to participate. Plus you could misspell that one person's name. But go to the Startekinfo site above, find the code, look in the right hand column for the 'remedy/test". It usually points to another step - which in this case is going to be to build the code reader and read the codes on the other diagnostic modules/pins. 4 is air pump related, maybe a vacuum hose. Idle speed control is a system, could be lots of thing, worst case is a throttle actuator. But next step is to build the 38 pin code reader.

sorry about the mispelled name deanyel. your helping hand is very helpful i printed out the chart but havent had chance to check the or tried to fix. will try to fix or look at next weekend going out of town this week.