300e Head Replacement Sucess!! Coolant?

		PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help
300e Head Replacement Sucess!! Coolant?

Thread Tools

Display Modes

Guest 300e Head Replacement ... 01-04-2002, 04:06 PM

Guest Here we go with the... 01-04-2002, 04:24 PM

pmizell Mike: Drain the water from... 01-04-2002, 08:46 PM

01-04-2002, 04:06 PM

MikeV

Guest

Posts: n/a

300e Head Replacement Sucess!! Coolant?

Thanks to all who offered me assistance and guidance thru this process. Yes I made a few rookie mistakes going thru it.(Stripping the bolt for the rotor plate into the cam: cost me a week)
Put it together last night and turned over and ran well , no smoke and fluids were clean!! Also lots of power.
My idle is about 1600 rpms but I think that because I broke the little black sensor with the two vacuum lines on the top, front of the head.

Question I put plain water to start it up but want to flush the cooling system. Any suggested way to do this and also recommended antifreeze for 300e.

TIA

Mike V

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is On Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2.6 Head Replacement / Timing Chain Data	87-300E_in_NC	Tech Help	10	12-24-2003 02:13 AM
Stereo System Replacement in 300E is Complete!	buddysdad5005	Car Audio and Multimedia	4	10-27-2002 08:42 AM
1990 300E Becker Replacement	buddysdad5005	Car Audio and Multimedia	2	10-02-2002 04:02 PM
1986 300E head rebuild/cam replacement	joebeetle	Tech Help	5	08-31-1999 09:39 PM
1986 300E head rebuild/cam replacement	joebeetle	Mercedes-Benz Performance Paddock	2	08-29-1999 08:35 PM

All times are GMT -4. The time now is 11:28 AM.