|
|
|
#1
|
||||
|
||||
rustproofing ideas
Anyone have any ideas what would be good to spray (I have a compressor) under my 300E to keep rust away? it's a low mileage 1988 and here in MA the roads are salted. I want to keep this car for a very long time. Thanks.
|
#2
|
||||
|
||||
There are several threads on this topic - often from forum members in Canada!
__________________
1992 W201 190E 1.8 171,000 km - Daily driver 1981 W123 300D ~ 100,000 miles / 160,000 km - project car stripped to the bone 1965 Land Rover Series 2a Station Wagon CIS recovery therapy! 1961 Volvo PV544 Bare metal rat rod-ish thing I'm here to chat about cars and to help others - I'm not here "to always be right" like an internet warrior Don't leave that there - I'll take it to bits! |
#3
|
|||
|
|||
Move to the desert.
Anziani |
#4
|
|||
|
|||
I though the factory sealing was pretty good on W124's. Make sure all the seams sealer is good- don't want spring perchs rusting off. Clean the fender drains in the front and use some wax on threads (wurth sells it in a can).
Besides that... you'll have to ask around in the rust belt. Might as the MB body shop were they rust first?? Michael |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|