|
|
|
|
|
#1
12-26-2001, 09:10 PM
|
|||
|
|||
|
190e starting problem
I have a 88 190e that will only start when I prime it (and run at high revs.) I have good spark and good pressure to the fuel distributor. However, I don't think there is pressure at the injectors. I have replaced the full fuel injection system and am still having the same problem. Are there any modules or computers that control the injectors that I may be able to replace. Any hints one what to try will be greatly appreciated.
thanks dragan 
|
|
#2
12-26-2001, 09:14 PM
|
|||
|
|||
|
Always start with the overvoltage relay and a fuel pump relay on the model if you don't have the adequate diagnostic tools.
They are located behind the battery.
__________________
Benzmac: Donnie Drummonds ASE CERTIFIED MASTER AUTO TECHNICIAN MERCEDES SPECIALIST 11 YRS
|
 |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Starting problem probably due to air in the diesel on a 1994 C250 - any tips | John Hamilton | Tech Help | 4 | 12-31-2008 08:17 AM |
| 240D intermittant starting problem | pj67coll | Diesel Discussion | 12 | 12-13-2003 07:16 AM |
| Starting problem with 230E | caidur | Tech Help | 9 | 12-09-2002 02:08 PM |
| 123 200D Starting Problem | Don Atienza | Tech Help | 11 | 01-23-2002 09:37 AM |
| 1987 190E Starting Problem (Went die suddenly) | Rajalbela | Tech Help | 1 | 01-09-2002 02:22 PM |
Linear Mode
