|
|
|
#1
|
|||
|
|||
matching lock cylinder source
Is there a place to get door and trunk lock cylinders that match other than PnP? Or even matching ign and other cylinders? 82 500SEC
__________________
85 300 SD ~ 115K 82 500 SEC Euro ??K 78 450SL 164K |
#2
|
||||
|
||||
dealership
or find a locksmith that can rekey |
#3
|
|||
|
|||
Dealership, most lockmiths charge more!
|
#4
|
|||
|
|||
I may mis-remember but I thought I read (a good while ago) about an aftermarket source that had matching ign and door cylinders.
__________________
85 300 SD ~ 115K 82 500 SEC Euro ??K 78 450SL 164K |
#5
|
|||
|
|||
Assuming the odd one out is your ignition and the doors/trunk/glovebox are the same and factory original, the easiest method is to take you VIN (+ title + driver's license) to the dealer and they'll order one that matches your original.
Cost is around $100. It's a DIY to swap. |
#6
|
||||
|
||||
Answer
Quote:
Zero = none... MB has the glove-box, door and boot/trunk lock patented/copyrighted = "instant extreme" litigation against anyone reproducing them... |
#7
|
|||
|
|||
Quote:
__________________
85 300 SD ~ 115K 82 500 SEC Euro ??K 78 450SL 164K |
#8
|
|||
|
|||
Another solution...
There is an alternative if you do not care much about the glove box. Add keyless remote control to the car. It can be done and you can forget about all the other keys except ignition and the driver door key ( assume they are the same ).
__________________
300SDL project car |
#9
|
|||
|
|||
I may do that. Probably the cheapest too. Thanks
__________________
85 300 SD ~ 115K 82 500 SEC Euro ??K 78 450SL 164K |
Bookmarks |
|
|