max speed 45mph/max rpm 2000
I ran this question already,but i thought a better description in title might get more spoons in the soup,as i have still not been able to figure this thing out.I should just give the car to my mother, she would never notice a thing wrong with it the way she drives. But, seriously, any help is appreciated.
The car is 1990 300e 3.0
Car ran great before replacing water pump and resealing top timing cover. Crank position sensor was removed and re-installed. Car starts just fine,idles smoothly, and then wether in park/neutral/drive, slow acceleration fine up to 2000 rpm, then bad misfiring and/or stall. Keeping below 2000rpm the car shifts normally and at about 45mph I can drive no faster without going over 2000rpm and misfiring/stall/severe studdering. No dash warnings lighting up other than when they should be prior to start. Fuel filter was changed 10,000 miles ago.Have checked all engine compartment electrical plugs, all are in place, and all connectors are clean.
distributor work re-checked and all was fine.
Happy new year
donnnnoooooo
|