Can anyone tell me where the thermo cooling fan switch is for a 190E? Also is there a way of testing the switch? Its a 1989 model, a little worse for wear

2.3 or 2.6?
Gilly

__________________
Click here to see the items I have up for auction at EBay

Click here to see a photo album of my '62 Sprite Project Moneypit (Now Sold)

Sorry,, its only a 2.0lt :p

woz:
If this is like a US 102 engine (2.3) the temp sensor for the aux fan is on top of the cylinder head adjacent to the oil cap. Should have 2 connectors on it, a 1 pin and a 2 pin connector. remove the 2 pin connector and with the key ON the fan should run. if it passes this test, and the engine temp has been observed to pass 110 degrees C without the fan running, then replace this sensor.
Gilly

__________________
Click here to see the items I have up for auction at EBay

Click here to see a photo album of my '62 Sprite Project Moneypit (Now Sold)

Thanks Gilly.