|
|
|
#1
|
|||
|
|||
AutoTap OBDII code reader
Anybody using the AutoTap unit? I have one and it worked fine with my 2002 but wont read the codes on my 2007..
|
#2
|
|||
|
|||
Which of these use CAN? Just the '07? Does your unit support CAN?
|
#3
|
|||
|
|||
I dont know but I will tomorow as I will call AutoTap and ask..
|
#4
|
|||
|
|||
Called AutoTap. He had me chlange a com port number in device manager to com 1 asnd it all works great. The code it threw was " B Camshaft Position Timing over" Cleared the CEL and so far all is good.. Wonder what made that code come up ?
|
#5
|
||||
|
||||
I bought AT back in the 1990s? I have not used it in forever since my is serial based and for the hassle of obtaining a quality converter and making it work, I would just go buy a new OBD2 reader for $40.
__________________
I'm not a doctor, but I'll have a look. '85 300SD 245k '87 300SDL 251k '90 300SEL 326k Six others from BMW, GM, and Ford. Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG] |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|