Quote:
Originally Posted by BeezerBob
Replaced the e-gas module with what is supposed to be a known good one. Still not syncing. So here's the summary: rebuilt actuator; new MAS; e-gas computer replaced; wiring harness has been replaced; new coils and connectors to plugs; and rebuilt actuator will not sync.
Any suggestions?
|
Any resolution on this? I have the same issue with my E420. I know my actuator is good. Had it tested by two companies and it's good. I changed my MAF and it's worse with the new one. Will start and immediately stall. With the old MAF, just like yours. Idles, stalls or revs drop to nothing at 1500. I have another long thread on a year quest to find fix. Not found yet...
08-03-2011, 11:30 PM
Hybrid Mode
