Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 01-21-2002, 07:23 PM
groove1962
Guest
 
Posts: n/a
Angry **HELP** Spring leaped off while driving 97 E420 **UPDATED**

**Updated**

Can anyone help me out here!

I just had my 1997 E420 shipped across country. Everything seemed ok coming off of the truck and after a quick hop around the block so I signed off of the shipment manifest.

Driving around the block I hit a small bump on the street. (Very small, it was an old manhole cover that was sealed over -- nothing unusual at all). I heard a BANG and then some loud whumping in the front left wheel wheel. It sounded like bowling balls in a dryer. Then ZING and I saw the entire spring shoot across the road! Fortunately I was only driving about 20 miles an hour and I was already in the right hand lane so I pulled over safely. I was able to run across the intersection and retrieve the suicidal spring. It appears to be intact. On the plus side I now have that sporty "lowrider" look ;-) too bad it's only on the front left side of the car!

My question is: what is involved in putting the spring back on and how much should I expect to pay?

Oh, and by the way, the shipper was American Auto Transporters of Canton, MA (www.shipcar.com). Please, no comments about how I should have tested it more thoroughly before signing off... believe me, I know!

**Update from the dealer**

The dealer just called and told me that the upper spring mount has been completely jerked off of the car. As in, it is no longer present at all on the car! Plus, it is a perfectly clean break along the weld (this is a welded part, not a bolted part). The dealer says that they have never, ever had to replace one of these due to "natural causes" (i.e., wear and tear), it only breaks if the weight of car is put on it by unnaturally attempting to pull/tow the car in an unnatural manner.

Fortunately the dealer also said that the shipper is welcome to send a representative down to check it out and he will show the shipper exactly what it looks like.

The good news is that welding on a new piece is estimated to only cost $492... the bad news is that my deductible is $500. It would be a pity to have to bring the lawyers into this one... let's hope that the shippers see the light of day. Thoughts?

Last edited by groove1962; 01-24-2002 at 11:23 PM.
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
W124 Broken Front Spring Due to Rust Chris Blanchard Diesel Discussion 0 01-18-2005 08:36 PM
2 (E420 and 190 16V) wonderful cars for sale ATATEXAN Mercedes-Benz Cars For Sale 2 08-30-2004 08:41 AM
"DRIVER'S EDGE"® SCHOOL....Performance Driving Instruction at it's BEST whitestars Events & Gatherings 0 02-22-2004 02:09 AM
"DRIVER'S EDGE"® SCHOOL....Performance Driving Instruction at it's BEST whitestars Mercedes-Benz Performance Paddock 0 02-22-2004 02:06 AM
Driving E420 in 3rd gear in city/highway??????? MitchLampson Mercedes-Benz Performance Paddock 3 11-20-2000 11:31 PM



All times are GMT -4. The time now is 05:03 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page