I got a mercedes tranny 722.358 that I was going to rebuild and put it in my wifes car when her tranny goes out. Her car (1992 300D 2.5) has a 722.4 tranny in it, the 722.358 came out of a 1990 300E 2.6. My question is will the 722.358 work in my wifes car?

If you happen to have the chassis types then this thread has all the combinations for the 722.3 transmissions

Transmission swap - 1982 turbo 300D

thanks to rs899.

EDIT:- sorry having just checked the thread I've noticed there are no 722.4 transmissions listed there.

We need to find someone with a similar list putting body type with transmission.

So BUMP anyone got that?

__________________
1992 W201 190E 1.8 171,000 km - Daily driver
1981 W123 300D ~ 100,000 miles / 160,000 km - project car stripped to the bone
1965 Land Rover Series 2a Station Wagon CIS recovery therapy!
1961 Volvo PV544 Bare metal rat rod-ish thing

I'm here to chat about cars and to help others - I'm not here "to always be right" like an internet warrior



Don't leave that there - I'll take it to bits!

Thanks for trying, just want to make sure that it will fit before I put money into the tranny.

The 722.4 is a smaller case and you'll need the matched driveshaft.
Other than that, it'll bolt up no problem.

__________________
2016 Monsoon Gray Audi Allroad - 21k
2008 Black Mercedes E350 4Matic Sport - 131k
2014 Jeep Wranger Unlimited Sahara - 62k
2003 Gray Mercedes ML350 - 122k

Great, I have the driveshaft from the 722.3 tranny. So it will work, I have heard the 722.3 is a stronger tranny then the 722.4? Is that true?

Yes, it is stronger. They last about the same amount of time though due to the original application ie: less HP/less weight chassis.

__________________
2016 Monsoon Gray Audi Allroad - 21k
2008 Black Mercedes E350 4Matic Sport - 131k
2014 Jeep Wranger Unlimited Sahara - 62k
2003 Gray Mercedes ML350 - 122k