![]() |
|
|
|
#1
|
|||
|
|||
123 rear window chrome.... ?
Ok i got.a.new rubber gasket i got it pulled on..but i cant get the chrome to go on...?or does it need.to go on before the gasket is roped in. Thanks
|
#2
|
||||
|
||||
__________________
1992 W201 190E 1.8 171,000 km - Daily driver 1981 W123 300D ~ 100,000 miles / 160,000 km - project car stripped to the bone 1965 Land Rover Series 2a Station Wagon CIS recovery therapy! 1961 Volvo PV544 Bare metal rat rod-ish thing I'm here to chat about cars and to help others - I'm not here "to always be right" like an internet warrior ![]() Don't leave that there - I'll take it to bits! |
#3
|
|||
|
|||
Quote:
|
#4
|
||||
|
||||
Steps 10 to 14 talk about the procedure of installation - if you go to the discuss this DIY here bit you end up at the original thread
http://www.peachparts.com/shopforum/body-repair-restoration/238275-rear-windshield-seal-w116-123-126-a-2.html And you'll see that at the end of the thread post 16 there's even a handy drawing of the trim and some more advice.
__________________
1992 W201 190E 1.8 171,000 km - Daily driver 1981 W123 300D ~ 100,000 miles / 160,000 km - project car stripped to the bone 1965 Land Rover Series 2a Station Wagon CIS recovery therapy! 1961 Volvo PV544 Bare metal rat rod-ish thing I'm here to chat about cars and to help others - I'm not here "to always be right" like an internet warrior ![]() Don't leave that there - I'll take it to bits! |
#5
|
|||
|
|||
Thanks iam on my cell.. I will look.tonight.
|
#6
|
|||
|
|||
I guess i need to pull the.rear.window out install the.chrome.thwn rope.it in dammit
hands arw.hurting.from.trying to wack it.intp place...good.thing i got.extra.trim.and rear.window |
![]() |
Bookmarks |
|
|