It works fine when actuated via SDS in addition when I test the switch via the SDS the switch seems to work fine. I'll eventually get into the schematic/troubleshooting but if anyone has seen this before any comments/thoughts would be appreciated. Problem is that the sunshade will not go down with the switch.

From reading some other threads it sounds like the raise/lower mechanism could stand to be cleaned but would it not work when actuated from the laptop if this was the case?

__________________
Jim

Are the rear headrests up or down?

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator

hmm, I did not even pay attention to the headrest.
Do they have to be down to put the shade down?

__________________
Jim