![]() |
|
|
|
|
#1
|
|||
|
|||
I got busy today and removed the pump and found no weak spots on the gasket between pump and engine so I figured I might as well take a closer look at the pump itself.
Tinkered around a bit and got the front cover off from the pump and then put everything back together with some added loctite. Fired it back up and went for a spin and there aren't any signs of leakage so far. ![]()
__________________
/Per MB E300TDT -98 |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Oil change using vacuum pump on '04 C320. | dolebludger | Tech Help | 15 | 01-28-2013 09:28 PM |
Problem: The oil pressure light stays on | toka | Tech Help | 4 | 11-22-2008 04:44 PM |
Vacuum pump diaphram removal ?? | 123 300D driver | Diesel Discussion | 2 | 10-08-2004 03:41 PM |
Demystifying Oil - General high-level info about oil | haasman | Tech Help | 6 | 04-21-2004 02:28 AM |
300D oil leak - looks like vacuum pump gasket | 240Joe | Diesel Discussion | 4 | 11-24-2001 09:40 AM |