Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 04-29-2013, 03:09 PM
jimm1009
 
Join Date: Jan 2012
Location: Lafayette, Louisiana area
Posts: 29
W126 Illumination ??

I was exploring my 420SEL while I had the cluster removed for some bulb replacements. I failed to find the illumination power while I was attemting to installed the auxiliaury terminal block below the parking brake pedal.
This is the same block used for 560's for heated seats and other extra powered devices. I have the other 4 wires connected but the 5th for the lights is not.
Any helpful hints would be greatly appreciated.
jimm1009
Reply With Quote
  #2  
Old 04-30-2013, 06:43 PM
jimm1009
 
Join Date: Jan 2012
Location: Lafayette, Louisiana area
Posts: 29
I received an answer from another owner and it appears that the source is on the right side above the heater controls and the carpeted panel must be removed to access it. Right side as sitting in the left front seat facing forward.

I will investigate in a day or two.
jimm1009
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 06:18 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page