Hey everyone,

I've just completed the front end rebuild on my 420SEL. All new rubber and parts up front. Originally I installed the wrong spring (126 321 18 04) which made the car sit way too high in the front.

I ordered a set of 126 321 17 04 based on the points system in the manual and the availability online. It seemed that where ever I punched in 420SEL the 17 04 spring came up.

I also installed the 4-nub coil spring shim based on the point system and indicated availability online.

I got these installed last night and the front end still seems to be sitting higher than it should.

Now, all the front end parts were removed and replaced so the location of the lower control arm's eccentric bolt might not be where it "should" be and the same as the guide rod. I am not sure how much these effect ride height on these cars.

Also the rear spring are 116 324 11 04 with the 3 nub coil spring shim. These numbers agree with the 32-240 PDF. So the rear springs are correct..

__________________
Cruise Control not working? Send me PM or email (jamesdean59@gmail.com). I might be able to help out.
Check here for compatibility, diagnostics, and availability!

(4/11/2020: Hi Everyone! I am still taking orders and replying to emails/PMs/etc, I appreciate your patience in these crazy times. Stay safe and healthy!)


82 300SD 145k
89 420SEL 210k
89 560SEL 118k
90 300SE 262k RIP 5/25/2010
90 560SEL 154k
91 300D 2.5 Turbo. 241k
93 190E 3.0 235k
93 300E 195k