|
|
|
#1
|
|||
|
|||
Cruise control switch bad?
When first setting cruise on '89 560SEL, car accelerates until lever is pushed down, then speed settles where it was set. Also, after if I turn cruise off, it will not turn on again until engine is switched off and restarted. The resume function does seem to work after braking. Is this likely to be the switch, or some other part of the system. If it's the switch I'd like to change it when I replace the ignition switch which I know is failing. Thanks
__________________
Earl McLain '02 C230 Kompressor '89 560 SEL "Frau BlueCar" (retired April 2004) |
#2
|
||||
|
||||
I have '84 300SD with EXACT same symptoms. I phoned Peter? (at GDL) and he indicated CC ECU was the culprit and said to send it infor refurb. I may try the circuit board check and resolder route first. If anyone has had a "cure" for the "restart to reset" problem I'd be interested as well. Thanks.
Bruce
__________________
The Golden Rule 1984 300SD (bought new, sold it in 1988, bought it back 13 yrs. later) |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Need non-working climate control, temperature and cruise control modules | mplafleur | Tech Help | 1 | 03-18-2007 06:24 PM |
300 TD Cruise Control problem | donehickman | Tech Help | 1 | 06-17-2004 04:01 PM |
Cruise control retrofit | Greg in Oz | Tech Help | 1 | 04-09-2003 12:39 AM |
Cruise Control Supposedly never worked right on my car...???? | 190D22 | Diesel Discussion | 7 | 12-28-2002 04:13 PM |
83 300D Cruise Control | rmmagow | Diesel Discussion | 1 | 06-20-2002 11:47 PM |