Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 04-14-2002, 03:14 PM
Posts: n/a
Question 102 engine mount suspect

Hi, All

Whilst changing the engine oil I managed to have a good look under the engine.

I saw that the engine mounting under the intake plumbing did not look like it's partner under the exhaust plumbing.

Most, if not all, of the engine mount issues raised in this forum are for the larger engined W124's, so my stint in the archives were not 100% applicable ...

How will I know, visually, if the mount is suspect. I have a 4 speed manual and there is some movement of the stick if you accellarate / decelarate - no metal-to-metal stuff jet ....

How easy are they to change ?

If anyone has a pic or two that they are willing to share - that'll be superb !!

Reply With Quote
Old 04-15-2002, 05:09 AM
Deltacom's Avatar
Join Date: Dec 2001
Location: Edge of the Abyss
Posts: 335
Engine Mounts


Check this URL by Mike Tangas:
Deltacom ~ Absit Iniuria Verbis ~
Reply With Quote
Old 04-15-2002, 06:22 AM
Posts: n/a
sub-frame mounts vs. engine mounts

Hi, Anthony

Thanks for the link, but the mountings I refer to are not the same as the sub-frame mounts mentioned in the article, nor do they look the same.

Replacing the engine mounts would probably require the 102 engine to be lifted to allow the mount to be changed. Problem is: where do I lift, by how much and what must be dismantled to achieve this.

thanks again, anyway

Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Oil Additives Bill Wood Performance Paddock 6 08-24-2011 10:53 AM
W124 Engine Mount Cooling Tube modification TSB?? d2bernhard Tech Help 1 09-08-2004 08:24 AM
which brand of engine mount? lizem100 Tech Help 5 11-10-2003 10:15 AM
you can replace oil cooler lines without removing engine mount - revisited janko Diesel Discussion 1 09-10-2002 04:22 PM
Anyone have 110 and 102 engine or G vehicle weight difference specs? 280GE ML, GL, G-Wagen, R-Class, Unimog, Sprinter 4 01-16-2002 04:37 PM

All times are GMT -4. The time now is 12:28 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page