Anyone have a source to buy these? For a 91 560 SEL. Pelican has one OEM. Pretty sure both sides are not the same, although I would think modification to one, if needed, would make it work.

Thoughts?

__________________
1991 560 SEL / 185k miles
1992 750il / 17k miles - project car

My only thought is that other than second hand it is probably only likely to be found at the dealer / as an original part

__________________
1992 W201 190E 1.8 171,000 km - Daily driver
1981 W123 300D ~ 100,000 miles / 160,000 km - project car stripped to the bone
1965 Land Rover Series 2a Station Wagon CIS recovery therapy!
1961 Volvo PV544 Bare metal rat rod-ish thing

I'm here to chat about cars and to help others - I'm not here "to always be right" like an internet warrior



Don't leave that there - I'll take it to bits!

1.Aircraft style light metal hand shears.
2.Appropriate thickness sheet Aluminum.
3.Self Etching "Silver" Primer in a "Rattle Can",along with a Can of Topcoat.
4.Bits and a Drill to make the necessary openings.

__________________
'84 300SD sold
124.128