Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 07-09-2015, 05:20 PM
Registered User
 
Join Date: Jun 2008
Location: Las Vegas, NV.
Posts: 83
HELP!! Pre Purchase Inspection w/NO Start

Hello Forum Friends:
I am looking to pick up a 1992 400e tomorrow;
However the car needs ignition tumbler/ignition key and I am NOT able to start Or drive it.
Is there an alternative way to start car ???? OR how can I tell the condition of the Engine AND Transmission without starting car??? Everything on the car is clean and price is/might be "Right" ;So those are the main two components that I am trying/hoping to assess their condition.
Please Help , Advise, Warn. Etc. THANKS All In Advance Chance

Reply With Quote
  #2  
Old 07-09-2015, 05:45 PM
Registered User
 
Join Date: Dec 2005
Location: Carson City, NV
Posts: 3,869
Assume engine and transmission are shot and make your offer accordingly.
__________________
Whoever said there's nothing more expensive than a cheap Mercedes never had a cheap Jaguar.

83 300D Turbo with manual conversion, early W126 vented front rotors and H4 headlights 401,xxx miles
08 Suzuki GSX-R600 M4 Slip-on 26,xxx miles
88 Jaguar XJS V12 94,xxx miles. Work in progress.
99 Mazda Miata 183,xxx miles.
Reply With Quote
  #3  
Old 07-09-2015, 06:50 PM
Registered User
 
Join Date: Jan 2012
Posts: 7,534
Yep, pay just over scrap price and you can get out of it if the car turns out to be a problem.

Has this car been sitting any length of time? Is a easy ploy, for a car with a bad engine / trans for the owner to lose the key. . .
Reply With Quote
  #4  
Old 07-10-2015, 12:13 AM
Banned
 
Join Date: Aug 2012
Location: Northwest Indiana
Posts: 10,936
Do you know the seller, and the history of the vehicle? If the seller is a know source give it a try. If it is a C/L sale giving $500 for it is more than they would get from the scrapper.
Reply With Quote
  #5  
Old 07-11-2015, 12:14 AM
Benz Mondi
 
Join Date: Nov 2006
Location: Sacramento area
Posts: 308
How much are you willing to do?

Normally, you can get the tumbler out if you can insert the key. You can use a remote starter switch hooked up to the engine bay fuse panel. You can ask "someone" how to hotwire it, all the info is out there if you are intent on finding the info.

Unless you have some urgent need to buy this car, without being able to start it you obviously can't tell what you're getting into. Just one of any number of major things wrong could easily mean thousands in repairs. If you could even just insert the key and turn it to the power (engine off) position, you'd be able to check the DTC (Diagnostic Trouble Code) plug in front of the battery and read the codes via the flashing LED.

V-8's are great, but they can easily be a very deep money pit even on a normal running 400E, let alone one that can't be started much less driven. I agree with a previous poster, if you're willing to gamble with $500 then it might make sense. Otherwise, I'd run not walk away.
__________________
03 CLK430 Cabrio 211K Pweter Silver/ Oyster Leather
90 300SEL 214k Pearl Black/ Alto Grey/Black Leather

Prior: 85 190E, 88 300TE, 89 300TE, 90 300E 2.6, 90 300TE, 92 300E 2.6, 91 and 93 300SL, 87 Ferrari Mondial Cabrio
Reply With Quote
  #6  
Old 07-13-2015, 11:27 AM
TnBob's Avatar
Registered User
 
Join Date: Dec 2009
Location: Shelbyville, Tn
Posts: 1,907
Chance... boils down to ... what would YOU pay for a car you have no knowledge of that you cant start ??

We can all guess as to why but its your dollars.
__________________
1985 300D 198K sold
1982 300D 202K
1989 300E 125K
1992 940T

"If you dont have time to do it safely, you dont have time to do it"

"The democracy will cease to exist when you take away from those who are willing to work and give to those who would not."
Reply With Quote
  #7  
Old 07-13-2015, 01:33 PM
Simpler=Better's Avatar
Ham Shanker
 
Join Date: May 2008
Location: Baltimore, MD
Posts: 2,544
Pay $0.10 per pound, maybe $0.12/lb

__________________
$60 OM617 Blank Exhaust Flanges
$110 OM606 Blank Exhaust Flanges
No merc at the moment
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 07:18 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page