My door on my 300sd would not close it was stuck open I removed the door panel and the door check. I noticed there is no grease and it does not slide. I was thinking of spraying with pb blaster and grease the track where it slides. Is there s trick to getting it to move from one position to the other or should I just go get a new one? Any help is appreciated

It has worked for 30 years and new ones are something like $25. I would get a new one.

This.



I had one stick open and would not close, I too had to disassemble the door to remove it. Luckily the car was at home when this failed.

__________________
I'm not a doctor, but I'll have a look.

'85 300SD 245k
'87 300SDL 251k
'90 300SEL 326k

Six others from BMW, GM, and Ford.

Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG]